Back to OMC bulletin index

Evinrude Ignition Bulletin 1230 - Timer Base Leads Interference

August 1979 factory bulletin explaining how to clamp timer base leads on 1979 V-4 outboards to prevent damage from the starter motor or flywheel.

Evinrude factory service bulletin header
IGNITION #1230
August, 1979
SUBJECT:   Timer Base Leads Interference - 1979 V-4 Models

It is possible for timer base leads to get caught by the starter motor or flywheel on 1979 V-4 motors.

The timer base leads should be clamped as shown in Figure 1. This will prevent the leads from being damaged by the starter motor pinion or the flywheel. Check the position of this clamp when servicing motors to prevent this occurrence.

Figure 1 - timer base leads and clamp location
EVINRUDE MOTORS
Service Department

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Universal Flywheel Puller Kit & Valve Lapping Compound

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.