Back to previous page

SB-1323 - Starting Engines at Speed

Issued October 1973, this Johnson Service Bulletin warns that 1974 50 through 135 H.P. outboards no longer have the powerhead-mounted speed-limiting safety switch. It explains how to check the throttle cam before starting to avoid an unintended wide-open-throttle start.

Johnson Outboards Service Bulletin factory letterhead
SB-#1323
October, 1973
SUBJECT:   Starting Engines at Speed
ON MODELS:   All 1974 50 thru 135 H.P.
SAFETY WARNING
Beginning with the 1974 models, the speed limiting switch
(safety switch) has been removed from the powerhead. The
engines maximum RPM while starting will be limited by the
warm-up lever on the remote control. If the engine is being
operated without having the control hooked up, you should use
care to determine what the throttle setting is since it would
be possible to start the engine at wide open throttle. To
protect against this possibility, we recommend that, before
starting the engine, you align the cam follower roller with
the "Start" mark on the throttle cam. See illustration.
Factory throttle cam diagram showing START mark and cam follower roller for 50 through 135 HP outboards

JOHNSON OUTBOARDS

D. J. Leinonen

Technical Data Coordinator

NOTE:   Post on your 50 thru 135 H.P. indexes under the heading
       "Miscellaneous".