Back to previous page

SB-1378 Rev. 1 - Gearcase Field Modification Program

Issued May 1975, this revised Johnson Service Bulletin describes a gearcase shift-rod retaining-ring recall for certain 1975 70, 85, 115 and 135 H.P. outboards. It provides model-specific serial-number cutoffs for units not affected by the campaign.

Johnson Service Bulletin factory letterhead
SB-#1378 Rev. 1
May, 1975
SUBJECT: Gearcase Field Modification Program
ON MODELS: 1975 70, 85, 115 and 135 H.P.
This service bulletin covers the recall campaign of some 1975 70 through 135 H.P. outboards as described below. If you have purchased any of the outboards involved, you would have been notified by Certified Mail prior to this bulletin.
Some 1975 70 H.P. and all 1975 85, 115 and 135 H.P. motors built before February 10, 1975 are affected.
Dislocation of a retaining ring in the Shift Rod Assembly allows the shifting mechanism to separate and malfunction.
If the mechanism malfunctions, the operator can move his remote control shift lever from reverse, through neutral and into forward gear, but his gearcase will remain in reverse.
The operator may become confused. His boat will be moving backwards when he feels it should be moving forward. In tight quarters, this could be hazardous.
All 1975 model units built after the following serial numbers are NOT AFFECTED:
Model NumberSerial Number
135ESL75E4334276
135ETL75E4336368
115ESL75E4324380
115ETL75E4329422
85ESL75E4312754
70ESL75B4285329
70ES75B4277780

Archive note: The supplied Revision 1 scan contains one page. The serial numbers above are the factory thresholds for units built after those numbers, which the bulletin states are not affected. No additional recall procedure pages were provided with this scan.

Related: SB-1337 - Snap Ring Program (1974)