Back to previous page

SB-1421 - Changes in 1977 Models

Issued July 1976, this Johnson Service Bulletin documents changes to the spark-plug wrench and engine lifting rings for 1977 Johnson outboards. The original one-page factory bulletin is reproduced below with searchable text and original technical illustrations.

Johnson Outboards Service Bulletin factory letterhead
SB-#1421

July, 1976

SUBJECT: Changes in 1977 Models

ON MODELS: 2 through 200 H.P. Johnson Outboards.

1.

Beginning with the 1977 models, the #375632 spark plug wrench is not in the owner's kit, but is available separately.

2.

Beginning with the 1977 models, the lifting ring is not on the 55 thru 140 h.p. motors. The V-6 lifting eye 321537 and universal puller #378103 may be used. For those who want a permanently attached ring the parts below should be used.

55 HP
Factory illustration of 55 HP lifting ring
(2) 314515 SCREW (1) 317670 LIFT RING
70/75 HP
Factory illustration of 70 and 75 HP lifting ring
(2) 314515 SCREW (1) 315930 LIFT RING
85-140 HP
Factory illustration of 85 to 140 HP lifting ring and cover
(2) 314515 SCREW (1) 318473 COVER (1) 317951 GASKET (1) 318485 LIFT RING
JOHNSON OUTBOARDS

D. J. Leinonen
Technical Data Coordinator
DJL/kr
NOTE: Post on your miscellaneous index under heading
"Engine Miscellaneous".