MISCELLANEOUS NO. 1055
August, 1974
REPAIR KITS FOR 1974 9.9 AND 15 H.P. ENGINES
In February and April, 1974, we issued bulletins - Ignition No. 1039 and Miscellaneous No. 1041 relative to problems on plug fouling and jumping out of gear on 9.9 and 15 H.P. engines. Subsequently, we have learned of some instances where these bulletins did not contain sufficient data to allow you to correct the problems. In addition, we have heard of other troublesome complaints which have occurred on some motors. In summary, these problem areas are:
1. Spark plug fouling.
2. Starter lockout adjustment.
3. Jumping out of gear.
4. Shift interlock adjustment.
In order to improve the performance of these motors, we have developed several repair kits. These kits are not intended for every engine you sold, but rather, they were designed to eliminate particularly troublesome problems which could not be eliminated by applying the corrective steps outlined in the bulletins mentioned above. The part numbers, purpose and applications for these kits is explained below:
1. 9.9 H.P. CARBURETION IMPROVEMENT KIT - PART NO. 387255
15 H.P. CARBURETION IMPROVEMENT KIT - PART NO. 387256
These two kits were designed for all 1974 15 H.P. engines and first series 1974 9.9 H.P. engines (first series 9.9 H.P. engines have the suffix letter “S” in the model number as in 10424S). These kits include redesigned carburetors, throttle cams, spark plugs and related parts which will improve the low and mid-range performance of the engine and eliminate any problems of spark plug fouling.
Since the installation of either of these kits requires carburetor removal, we recommend that the starter lockout repair kit described as follows also be installed.
2. 9.9 AND 15 H.P. STARTER LOCKOUT REPAIR KIT - PART NO. 387252
This kit includes a yoke and link to replace the linkage between the shift rod bellcrank and the starter interlock cam and a redesigned cam follower rod. This kit should be installed on all engines which have the carburetion improvement kit installed and on any other engines where the starter lockout system has a history of getting out of adjustment.
3. 9.9 AND 15 H.P. GEARCASE REPAIR KIT - PART NO. 387254
This kit consists of forward and reverse gears, a clutch dog and related parts. This kit is designed for engines which have a history of jumping out of gear. Whenever this kit is installed, the shift interlock repair kit as described below must also be installed.
4. 9.9 AND 15 H.P. SHIFT INTERLOCK REPAIR KIT - PART NO. 387253
This kit includes a redesigned lever and hub, shift lock stop, shift lock detent, detent support and related parts. The new ramp shape on the lever and hub causes pressure to be applied to the shift mechanism whenever the engine is in forward. This kit should be installed on all engines which have a history of jumping out of gear and on any other engines where the shift interlock has a history of getting out of adjustment.
Each of the kits described above are supplied with installation instructions which are supplemental to the information found in your service manuals. The flat rate allowance for installation of each of these kits are as follows:
| ITEM NO. | KIT DESCRIPTION | 9.9 HP | 15 HP |
|---|
| 1. | CARBURETION IMPROVEMENT | 387255 | 387256 |
| 2. | STARTER LOCKOUT REPAIR | 387252 | 387252 |
| 3. | GEARCASE REPAIR KIT | 387254 | 387254 |
| 4. | SHIFT INTERLOCK REPAIR | 387253 | 387253 |
| FLAT RATE ALLOWANCES (Includes test time where applicable) | 9.9 HP | 15 HP |
|---|
| Item 1 only | 1.6 Hrs. | 2.1 Hrs. |
| Item 2 only | .7 Hrs. | .7 Hrs. |
| Item 4 only | 1.4 Hrs. | 1.4 Hrs. |
| Items 1 and 2 on same engine | 2.3 Hrs. | 2.8 Hrs. |
| Items 1, 2 and 4 on same engine | 3.1 Hrs. | 3.6 Hrs. |
| Items 2, 3 and 4 on same engine | 3.1 Hrs. | 3.1 Hrs. |
| Items 2 and 4 on same engine | 2.1 Hrs. | 2.1 Hrs. |
| Items 3 and 4 on same engine | 2.4 Hrs. | 2.4 Hrs. |
| Items 1, 2, 3 and 4 on same engine | 4.1 Hrs. | 4.6 Hrs. |
To order kits, fill out a warranty claim (one for each model and serial number) and mail claim to the Evinrude Service Department. Please be sure to indicate on each claim, the item number and kit description required. Kits will be shipped direct to you from Milwaukee, Wisconsin.
After the motor has been repaired, retain the obsolete parts along with your copy of each warranty claim. Your Sales and/or Service Representative will inspect and dispose of this material.
EVINRUDE MOTORS
Service Department