Back to previous page

SB-1366 - Dual Engine Steering System Recommendation

Issued January 1975, this Johnson Service Bulletin warns that dual-engine steering installations using a single steering cable and tie bar can cause steering-ram damage and loss of steering control in rough water. Applies to 1973-1975 Johnson 50 through 135 H.P. outboards.

Original Johnson Service Bulletin letterhead
SB-#1366
Factory safety warning triangle
January, 1975
SUBJECT: Dual Engine Steering System Recommendation
ON MODELS: 1973 thru 1975, 50 thru 135 H.P.
SAFETY WARNING

Our field representatives have reported seeing dual engine installations which have been rigged using only one steering cable and a tie bar. This is definitely not a recommended practice. Our tests have indicated that the reaction forces at work in rough water can be strong enough to bend the steering ram on this type of installation. When this occurs, the result is a "frozen" steering system.

The steering system selection guide (P/N 318279) packaged in the owner's kit of every 50 thru 135 H.P. engine lists the recommended kits for troublefree steering installation. Protect your customer and yourself by following these recommendations.

JOHNSON OUTBOARDS
D. J. Leinonen
Technical Data Coordinator
NOTE: Post on your 50 thru 135 H.P. indexes under heading
"Miscellaneous", and Miscellaneous index under heading
"Accessories".
DJL/kr

Related steering bulletins

See SB-1241 - Remote Steering System Installation, SB-1302 - New Steering System Recommendations, and SB-1319 - Potentially Dangerous Steering Kits. The factory references steering system selection guide P/N 318279.