Currently, only a few bulletins are posted. There are so many other aspects of this site that need to be worked on; there is no reason to spend the time and effort to publish bulletins nobody will ever read.
If you need a bulletin, please use the “Contact” link above, and I will gladly post it. Be sure to include the Bulletin Number!
Administrative (A) Bulletins | ||
Model | Subject | Bulletin Number |
All | Consumer-Purchased FPC Extended Service Contracts | 2006-01(A) |
All | 2001-2005 Bulletin Set, P/N 5007148 | 2006-02(A) |
2007 Evinrude and Johnson Outboards | In-Box Components | 2006-03(A) |
Evinrude E-TEC and Evinrude Direct Injection | EMM Software Updates and Warranty Allowance Requests | 2006-04(A) |
All 2008 and newer Evinrude and John- son Outboards | Change in Warranty Registration Require- ments and Date of Delivery | 2007-01(A) |
2008 Evinrude Outboards | In-Box Components | 2007-02(A) |
All | DealerPort Enhancements | 2007-03(A) |
All Evinrude E-TEC | EMM Replacement Replaced by Administrative Bulletin 2009-02(A) |
2008-01(A) |
2009 Evinrude E-TEC Outboards | In-Box Components, Full Throttle Operat- ing Ranges, and Weights | 2008-02(A) |
2010 Model Year and Newer Outboard Engines | U.S. EPA Regulations and BRP Engine Warranty Changes | 2009-01(A) |
All Evinrude E-TEC | EMM Replacement Replaced by Administrative Bulletin 2011-02(A) |
2009-02(A) |
2010 Evinrude E-TEC Outboards | In-Box Components, Full Throttle Operating Ranges, and Weights | 2010-01(A) (Rev 1) |
All Evinrude E-TEC Outboards | ICON System Flat Rate Table | 2010-02(A) |
2010 and newer Evinrude E-TEC Out- boards | U.S. Environmental Protection Agency (EPA) EPA Label | 2010-03(A) |
Evinrude/Johnson Outboards | B.E.S.T Contracts | 2010-04(A) |
2011 Evinrude E-TEC Outboards | In-Box Components, Full Throttle Operating Ranges, and Weights | 2010-05(A) |
Parts and Accessories (P) Bulletins | ||
Model | Subject | Bulletin Number |
Evinrude E-TEC Outboards | Oil Tank Label — Evinrude/Johnson XD100 Oil Use, P/N 352927 | 2006-01(P) |
Evinrude E-TEC 40-90 HP | Oil Tank Assembly Replacement Service Parts | 2006-02(P) |
All Models | Propeller Warranty Coverage | 2006-03(P) |
I-Command Classic Instruments | I-Command Classic Instruments | 2006-04(P) |
2005 & newer 90° V6 200 - 250 HP 2007 & newer 60° V4 /
V6 115 - 200 HP 2008 & newer Inline 40 - 90 HP |
I-Command Network Connector(s) | 2007-01(P) |
All | I-Command and NMEA 2000 Network Connectors | 2008-01(P) |
All Evinrude E-TEC | EMM Replacement | 2008-02(P) |
All | I-Command Water Pressure Sensor Kits | 2008-03(P) |
All | I-CommandTM Fuel Level Converter Kits | 2008-04(P) |
All | Engine Mounting Screws | 2009-01(P) |
All | Propeller Warranty Coverage | 2009-02(P) |
All | I-Command Digital Gauges | 2010-01(P) |
Predelivery (D) Bulletins | ||
Model | Subject | Bulletin Number |
Evinrude E-TEC Outboards | Oil Injection Information and NEW E-TEC Predelivery Checklist | 2006-01(D) |
Evinrude E-TEC 40 — 90HP Outboards with Accessory Tiller Handle Kit Installed | Start in Gear Protection | 2007-01(D) |
All | Requirements for Outboard Installation on a Jack Plates Replaced by Predelivery Bulletin 2009-01(D) |
2008-01(D) |
2009 Evinrude E-TEC 25 — 30 HP | Installation and Predelivery | 2008-02(D) |
All | Outboard Jack Plates and Hardware | 2009-01(D) |
All | Predelivery Procedures | 2010-01(D) |
2011 Evinrude E-TEC 250-300 HP (3.4 L) Outboards | New Installation and Predelivery Proce- dure | 2010-02(D) |
Service (S) Bulletins | ||
Model | Subject | Bulletin Number |
Evinrude E-TEC Outboards | Engine Duty Cycle and Spark Plugs | 2006-01(S) |
Evinrude E-TEC 200-250 HP | Cylinder Head Deflector Pins and Spark Plug Longevity | 2006-02(S) |
All | 2007 Essential Service Tools and Soft- ware, Two-Stroke | 2006-03(S) |
Evinrude E-TEC 115-250 HP | Evinrude E-TEC CANBus Software Update | 2006-04(S) |
Evinrude E-TEC 40-60 HP Outboards | Water Pump Assembly | 2006-05(S) |
Evinrude and Johnson Outboards | Fuel Requirements | 2006-06(S) |
Evinrude E-TEC 40-90 HP | Engine Idle Operating Temperature and Spark Plug Longevity | 2006-07(S) |
All 40 - 225 HP 4-Stroke Models | Gearcase Lubricant Level | 2007-01(S) |
2008 Evinrude E-TEC 40-300 HP | Temperature Sensor Installation | 2008-01(S) |
All Models | Propeller Shaft Seal Tools | 2008-02(S) |
2008 and Newer Evinrude E-TEC Outboards — V6 Gearcases | New Service Tools - 2008 Model Year | 2008-03(S) |
2009 Evinrude E-TEC Outboards | Starter Solenoid Servicing | 2008-04(S) |
All Evinrude DI and Evinrude E-TEC Outboards | Evinrude Diagnostics Software Replaced by Service Bulletin 2011-02(S) |
2008-05(S) |
All Models | Fuel System Requirements and Testing | 2008-06(S) |
2009 and Newer Evinrude E-TEC 25 — 30 HP | Fuel Injector and Vapor Separator Servic- ing | 2008-07(S) |
Evinrude MFE (Multi Fuel Engine) Outboards | De-carboning Procedure | 2008-08(S) |
All Models | Service Tools - 2009 Model Year | 2009-01(S) |
All 2009 and newer Evinrude E-TEC 25 — 30 HP Models | Engine Management Module (EMM) Damage | 2009-02(S) |
All 2009 and newer Evinrude E-TEC Models | Requirement for EPA Approved Fuel Hoses | 2009-03(S) |
2009 and 2010 Evinrude E-TEC 90°V6 (3.4 L) 250 HP (H.O.) Outboards | Engine Performance and Cylinder Head Kit, P/N 5008247 | 2009-04(S) |
2009 Evinrude E-TEC 75 — 90 HP Outboards | Incorrect Wiring Diagram in Service Man- ual, P/N 5007811 | 2010-01(S) |
Evinrude E-TEC 15 — 300 HP Outboards | Damaged Wiring Resulting from Improper Rigging or Faulty Connections | 2010-02(S) |
Evinrude E-TEC 75-300 HP Outboards | Gearcase Alignment Gauge Kit, P/N 5006349 | 2010-03(S) |
Evinrude E-TEC 15 — 300 HP Outboards | Warranty Powerhead Identification | 2010-04(S) |
Evinrude E-TEC 150 — 200 HP 60°V6 Outboards | Oil Distribution Hose Routing | 2010-05(S) |
All | Operation in Oil Contaminated Water | 2010-06(S) |
All Evinrude E-TEC® 15-300 HP Out- boards, 1999-2001 Evinrude Ficht 75-250 HP Outboards, and 2002-2006 Evinrude DI 75-250 HP Outboards | Injector Coefficient Database | 2010-07(S) |
Evinrude E-TEC 15 — 30 HP Outboards | Torque Change for Flywheel Nut | 2010-08(S) |
All | New Service Tools - 2011 Model Year | 2010-09(S) |
Evinrude E-TEC 40 — 90 HP Outboards | Installing Replacement Lower Engine Covers | 2010-10(S) |
Warranty (W) Bulletins (includes, EPA, Safety and Warranty Campaigns) | ||
Model | Subject | Bulletin Number |
40-90 HP Evinrude E-TEC | Shift Cable Replacement on Evinrude E-TEC Tiller Handle
Kits * Safety Campaign * |
2006-01(W) |
200, 225 HP Johnson ® 4-Stroke | Engine Control Module (ECM) Replacement * Safety Campaign * | 2006-02(W) |
2007 Evinrude E-TEC 60°V6 150-200 HP "F" Suffix Models | Engine Software Update | 2006-03(W) |
2006 Evinrude E-TEC 40DRLSD (40 HP Rope Start Tiller Models with or without an electric start kit added) | Start in Gear * Safety Campaign * |
2006-04(W) |
2004-2007 Model Year 40-90 HP Evinrude E-TEC Outboards | Fuel Filter Replacement * Safety Campaign * | 2006-05(W) |
2007 Evinrude E-TEC 60°V4 115 HP Models | Engine Software Update | 2006-06(W) |
2006 and 2007 Model Year Johnson ® 4- Stroke 2.5 HP | Water Pump | 2006-07(W) Rev. 1 |
2007 Evinrude E-TEC 90°V6 200-250 HP | Engine Software Update | 2007-01(W) |
2008 Evinrude E-TEC 90°V6 225-250HP Outboards and Certain Replacement Powerheads (3.3 L) | Engine Software Update | 2008-01(W) |
2008 Evinrude E-TEC 90°V6 250H0 and 300HP (3.4 L) | Temperature Sensor(s) and Clamp Ser- vice | 2008-02(W) |
2008 Evinrude E-TEC 90°V6 (3.4 L) 300HP Outboards | Engine Software Update | 2008-03(W) |
2008 Evinrude E-TEC 90°V6(3.4 L) 250HP Outboards | Engine Software Update and Impeller Replacement | 2008-04(W) |
2008 & 2009 Evinrude E-TEC 40 — 90HP Models | Stator Servicing | 2008-05(W) |
2008/2009 Evinrude E-TEC 90°V6 (3.4 L) 250 H.O. and 300HP Outboards |
Engine Software Update | 2008-06(W) |
2008-09 Evinrude E-TEC 40 —, 60 HP DTL (tiller electric) below serial number 5253702; and, 2004 to 2009 40 — 115 HP Evinrude E-TEC with an installed tiller kit | Start Switch Repair * Safety Campaign * |
2008-07(W) |
2009 Evinrude E-TEC 25-30 HP DPL and DEL outboard models below serial number 8751149 | Start in Gear * Safety Campaign * |
2009-01(W) |
2004-2010 Evinrude E-TEC 40 HP DRL models; 2005 Evinrude E-TEC 60 HP WDR models; and 2008-2010 Evinrude E-TEC 65 HP WDR models, below serial number 5261353 | Start in Gear * Safety Campaign * |
2009-02(W) |
2008-2010 Evinrude E-TEC 40 — 90 HP from serial number 5234342 to 5261350 and service replacement vapor separator, P/N 5007661 | Vapor Separator Repair * Safety Campaign * |
2009-03(W) |
2009 & 2010 Model Year Evinrude E-TEC 25/30HP Outboards (Tiller Equipped Models Only) | Software Update for Touch Troll (Idle Speed Control) | 2009-04(W) |
2010 Evinrude E-TEC 90°V6 (3.3 L) 225 HP (H.O. models) and (3.4 L) 250 HP (H.O. models) and 300 HP Outboards | Fuel Injector Replacement | 2009-05(W) |
2010 Evinrude E-TEC 75 HP, 90 HP, 115 HP and 130HP Outboards | Trim and Tilt Hydraulic Assembly Replacement | 2010-01(W) |
2010 Evinrude E-TEC 115 HP, 130 HP, 150 HP, 175 HP, 200 HP, 225
HP, 250 HP and 300 HP Outboards |
Oil Pump Assembly Replacement and Oil Hose Routing SECOND NOTICE | 2010-02(W) |
2009 and 2010 Evinrude E-TEC 15 HP, 25 HP, 30 HP, 40 HP, 65 HP, and 2009 Evinrude 55 HP MFE Outboards | Fuel Hose and Primer Bulb Assembly Replacement * EPA Campaign * |
2010-03(W) |
2010 Evinrude E-TEC 40 - 90 HP and 2011 Evinrude E-TEC 40 - 90 HP | Incorrectly Installed Clamps on Fuel Hoses * Safety Campaign * |
2010-04(W) Rev. 2 |
2011 Evinrude E-TEC 200 HP-250 HP 90° V6 (3.3 L) Outboards | Shift Lever Cam | 2010-05(W) |
2011 Evinrude E-TEC 15 HP, 25 HP, and 30 HP Outboards | Shift Lever Screws | 2010-06(W) |
This bulletin was NOT issued. | 2010-07(W) | |
2010 and 2011 Evinrude E-TEC 115-300 HP Outboards | Starter Drive Gear Engagement | 2010-08(W) |
2011 Evinrude E-TEC 15 HP, 25 HP, and 30 HP Outboards | Engine Software Update * EPA Campaign * |
2010-09(W) |